A Henry vacuum cleaner will function without a bag in an emergency, but that doesn’t mean it’s a good idea.. As mentioned above, not using a bag will quickly clog up the primary filter.
The Shark comes with both a pre-motor and post-motor filter.The pre-motor filter consists of two components – foam and felt layers – and the post-motor filter is a single piece.. Here’s.
how to clean the filters on a Shark vacuum.Remove the pre-motor filter from the top of the dust cup..Tap off excess dirt into a bin.. Rinse the filter with cold water only.
Do not use detergents or soap..Remove the post-motor filter from the main body of the vacuum.. Again, rinse with cold water only until the water runs clear..
Allow both filters at least 24 hours to fully dry before putting them back into the vacuum cleaner.. Be careful when cleaning the felt filters, as these are easy to damage.
Don’t worry if the filters are discoloured – this is completely normal.These vacs make cleaning offices much easier, for example, as there’s no bulky unit to push and pull around furniture.
They are also much more practical for cleaning buses or coaches, as you can access all the tight locations without pushing a heavy upright around.. Staircases are another area where backpack vacuums have a big advantage over uprights or cylinder vacuums.As the vacuum body is worn by the cleaner, they don’t need to worry about balancing a bulky vacuum on steps.. Where Are Backpack Vacuums Useful?.
Some examples of locations where a backpack vacuum could be useful include:.Cinemas and theatres.